Stumbelbloc in Cape Town contributes to the construction industry by offering plastic brick moulds to its customers. With their innovative brick-shaped plastic moulds, anyone can build interlocking blocks without special skills and in a very amount small of time. These blocks can be used for constructing houses, sheds, walls, ponds, soakaways etc.
Product of Stumbelbloc – Brick Mould
Stumbelbloc offers brick moulds made of plastic. These moulds are used to make interlocking blocks that you can use for any construction at your home. Interlocking blocks provide more strength to buildings than traditional bricks. The plastic moulds are divided into two parts, red and yellow. The parts are put together to fill them with a cement mixture and kept in an even place when the mixture can be hardened into a block.
The right mixture ratio
To make the blocks strong and durable, it is crucial to mix the materials in the right ratio. You need –
- 2.5 level full wheelbarrows building sand.
- 13mm stone.
- One bag 42.5 MPa cement.
- Water as required. Spring it until the mixture achieves buttery consistency.
Mixture and materials related tips
While the proper ratio is crucial, it is not enough to mould high-quality blocks. You must also be concerned about the materials.
- Materials have to be clay and organic free.
- You must not use only fine or coarse sand; the best idea is mixing them well.
- Add 10% fine sand to the coarse sand.
- Instead of sand, you can also use quarry dust or run.
Manuals provided by Stumbelbloc
Stumbelbloc does not provide the clients with blocks. They only offer the plastic brick moulds so the clients can mould and brick their blocks themselves. To help the clients, they offer two manuals, such as –
In the moulding manual, the process of moulding is shown in five steps –
- Oiling the moulds.
- Cast moulds/fill.
- Releasing mould.
In the building manual, clients can learn how to use interlocking blocks in construction in twenty-two steps, including –
- Set out blockwork.
- How to lay stumbelbloc.
- How to create a lintel.
- Roof bracing straps.
- Plumbing and electricity.
- Control joints.
- Lateral reinforcements.
With the help of these manuals, you can make use stumbelblocs interlocking brick moulds optimally. To know more about the services and products of Stumbelbloc, visit their website: http://stumbelbloc.com/.
Stumbelbloc was founded by Andre Esterhuizen. From his experience in the construction field, Andre realised that South Africa is facing problems with construction because of the extremity of temperature and scarcity of skilled labourers. So, he aimed to contribute to this industry by providing easy building solutions at low costs. This resulted in the formation of Stumbelbloc and their interlocking block design mould to make interlocking blocks.
Milnerton, Cape Town, 7441, South Africa
Tel: (021) 5511011